Documentation for BOLTS 0.4 (development version)

stable dev

How to create a base module

This tutorial shows you the preferred way to make a class from a collection available in OpenSCAD.

This assumes that you have already a module available that takes a number of parameters as input and builds the part that the class describes.

If not you have two options. Either you learn OpenSCAD and write such a module yourself.

Or you try to find out if someone else has done this already. There are a number of sites where a lot of scad code is published:

However, to use code written by someone else, you need to make sure that there are no licensing problems. I wrote about licensing in BOLTS here. If the code has no licensing information or is published under a incompatible license, you can try to contact the author and ask him to dual-license with a license that allows inclusion in BOLTS.

This tutorial will illustrate the process using the example of the pipe collection with a pipe module that lives in a file called pipe.scad:

/* Pipe module for OpenSCAD
 * Copyright (C) 2013 Johannes Reinhardt <jreinhardt@ist-dein-freund.de>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 */

module pipe(id,od,l){
    difference(){
        cylinder(r=od/2,h=l,center=true);
        cylinder(r=id/2,h=l+1,center=true);
    }
}

Putting the scad file to the right place

The file with the module should be moved to a subdirectory of the openscad directory which is named after the collection id to which the part belongs. If this directory does not exist, create it.

So in the case of the pipes collection pipe.scad is now in the directory openscad/pipes relative to the BOLTS root folder.

Write the base file

This collection directory must also contain the base file for this directory. The base file provides BOLTS with all the informations it needs to know about the files in a collection directory, it is a kind of manifest file. It contains a list of sections (more precisely base file elements), each describing one file.

For the pipes collection the base file is openscad/pipes/pipes.base and has the following content:

---
- filename: pipe.scad
  type: module
  author: Johannes Reinhardt <jreinhardt@ist-dein-freund.de>
  license: LGPL 2.1+ <http://www.gnu.org/licenses/lgpl-2.1>
  modules:
    - name: pipe
      arguments: [id, od, l]
      classids: [genericpipe, din11850range2]
  source: own work
...

The type field indicates, that this file contains one or more OpenSCAD modules. The author field gives the author of pipe.scad and contact information. In the license field the license of pipe.scad is indicated and then follows the list of modules that are contained in the file.

In the case of pipe.scad there is only one module called pipe. The arguments field gives the parameters that need to be supplied to the module. The parameters must be a subset of the parameters of the class as it is defined in the blt file.

The classids field contains a list of classids which this module can represent. Be careful, that the parameter names and meanings for all classes in this list must be the same, otherwise the some parameters can not be found for some classes.

There is the possibility to add an optional source field which allows to give informations about the origin of the file. If there is a URL from which this file was downloaded, this can be included here.

Testing

Now it should be tested that the newly added part really works. This is most conveniently done using the utility script:

./bolts.py export openscad
./bolts.py test openscad

This will fire up a OpenSCAD instance with the module search path set appropriately, so that typing

include <BOLTS.scad>

DIN11850_Range_2("10",1000);

should give you a pipe with nominal diameter 10 and 1m length.

Next steps

You might want to add connectors to simplify the positioning of the part in OpenSCAD and/or contribute this part to BOLTS, so that every user can profit from your efforts.

Comments